General Features
Tower
- Non-corrosive Aluminium body
- Amply sized to save heat of adsorption.
- Large desiccant candle, ensures sufficient contact time to produce -40°C dew point (-60°C with Molecular sieves).
- Each tower is provided with pressure gauge.
Filters
Each dryer is equipped with a Pre-filter to protect desiccant from free water contamination,dust, scales, etc.,and an after-filter to avoid desiccant dust carry over.
Pressure Gauge
Pressure gauges on each tower for easier illustration of working of dryer.
Valves
Highly reliable solenoid valves, to international standards,which act as main flow and exhaust valves.Precision orifice for highly accurate purge flow.
WHY SUPER PACK INSTEAD OF OTHER DRYERS?
- Occupies no floor space as it is wall mounted.
- Easy to operate.
- No moving parts and hence high reliability.
- Least maintenance required.
- Electronic timer enables accurate cycle timing.
Technical Specification
Schematic Diagram
Specification
Operating Conditions
| Ideal | Maximum | |
| Working Pressure | 4 bar to 10 bar | 12 bar |
| Inlet Temperature | 40°C | 50°C |
| Atmospheric Dew Point | -40°C | -60°C |
| Cycle Time | 4 minutes | 4 minutes |
| Electrical | 220V / 50 Hz / Single Phase | 220V / 50 Hz / Single Phase |
* Product Design and specifications are subject to change due to constant upgradation.
What dew point does the SPD Series achieve?
-40degC under ideal conditions, down to -60degC at maximum rated performance.
What working pressure and inlet temperature does it handle?
4-10 bar ideal (up to 12 bar max), with an inlet temperature of 40degC ideal (up to 50degC max).
What is the regeneration cycle time?
4 minutes.
What is the tower body made from?
Non-corrosive aluminium, sized generously to absorb the heat of adsorption during the drying cycle.
What electrical supply does it need?
220V, single-phase, 50Hz.