Dry Cooling Tower
DRY COOLING TOWER is an equipment which is used to cool and maintain the temperature of process hot water at a particular level. This operates on the principle of heat transfer by a heat exchanger with extended fins. The fan is driven by an Electric motor. The aqua saver is built with corrosion resistant aluminium sheets.
SALIENT FEATURES:
- Imported copper tube coils, minimal joints
- Leak-resistant brazed headers
- Low-noise axial flow fans
- Corrosion-resistant aluminium enclosure
- IP55 weatherproof motors
- ISO 9001:2015 Certified
- Made in India
Wall Mounting Compressed Air Dryer
GEM's Wall Mounting Compressed Air Dryer is the perfect solution for facilities needing a compact, space-saving dryer.
SALIENT FEATURES:
- Wall mounting -- saves floor space
- Cyclic energy-saving mode
- Compact size, weldless frame
- Dual mounting options
- Pressure dew point 3-7degC
- Easy-to-clean auto drain valve
- Optional filter available
- ISO 9001:2015 Certified
- Made in India
All Aluminium Compressed Air Dryer
GEM's 2KD-G series is an all-aluminium refrigerated compressed air dryer designed to remove moisture from compressed air and provide a stable pressure dew point for industrial compressed air systems. The aluminium heat exchanger provides corrosion-resistant heat transfer in a compact design, while the integrated moisture separator and automatic drain system help remove condensate from the compressed air stream.
The 2KD-G series is available in capacities from 20 CFM to 300 CFM, with working pressure from 7–16 bar and pressure dew point of 2–4°C under specified operating conditions.
Key Features of the All Aluminium Compressed Air Dryer
- Compact design
- Aluminium heat exchanger
- Energy-efficient compressor
- Programmable auto drain valve
- Unique multifunctional controller
- Air in/out connections on top
- ISO 9001:2015 Certified
- Made in India
Compressed Air Receiver
Stores compressed air, settles out moisture and impurities, and equalises pressure variations in the system.
SALIENT FEATURES:
- Designed as per IS 7938
- Hand and man holes for access
- Working pressure up to 40 bar
- Shell/dish as per ASME Sec VIII and IS 2825
- ISO 9001:2015 Certified
- Made in India
Square Cooling Tower
SALIENT FEATURES:
- Capacity : 100 TR - 1000 TR
- Cell : Single & multiple cell
- Type : Standard, high temperature, quiet
Adiabatic Cooling Tower
Closed-loop dry cooling with an adiabatic pre-cooling boost for hot weather.
SALIENT FEATURES:
- Adiabatic pre-cooling pads for a hot-weather performance boost
- Available ADCT 80 to ADCT 320
- Low noise model available
- Closed-loop design -- no continuous water consumption
- Copper tube coil heat exchanger, same core design as GEM's Dry Cooling Tower
- ISO 9001:2015 Certified
- Made in India
Cross Flow Cooling Tower
Closed-circuit cross-flow cooler with a lightweight, corrosion-resistant FRP casing.
SALIENT FEATURES:
- Closed-circuit design keeps process fluid clean
- Hot-dip galvanized steel frame
- Lightweight FRP casing -- no painting required
- Low-noise, energy-efficient axial fan
- Easy inspection and maintenance access
- ISO 9001:2015 Certified
- Made in India
SCT Cooling Tower
Where "Cost" matters.
SALIENT FEATURES:
- High efficiency
- Compact design
- Low maintenance cost
- Multiple capacity options (100-300+ TR)
- ISO 9001:2015 Certified
- Made in India
3G Rotary Compressor Series Compressed Air Dryer
Compact, lightweight, and easy to operate.
SALIENT FEATURES:
- 9 sizes available (100-600 CFM), up to 16 bar
- Pressure dew point as low as +3degC
- Electronic no-loss drain with strainer
- Micro controller with dew point display
- Low pressure drop (typically below 0.2 bar)
- Certified to IS 11989 / ISO 7183 / ISO 8673
- ISO 9001:2015 Certified
- Made in India
VFD Compressor Series Compressed Air Dryer
Compact, lightweight, and easy to operate.
SALIENT FEATURES:
- Energy savings up to 50% indirect / 70% direct via VFD
- 6 sizes available (750-3000 CFM), up to 16 bar
- Pressure dew point as low as +3degC, ISO 8573-1 Class 4
- CFC-free R410a refrigerant, zero ODP, F-Gas compliant
- Advanced HMI touch controller, remote monitoring
- Compact all-in-one, plug-and-play, quiet operation
- ISO 9001:2015 Certified
- Made in India
About Us
Gem Equipments entered the engineering and fabrication industry in 1984. We specialise in design, engineering and fabrication of Cooling Towers, Compressed Air Dryers, Industrial Chillers and Compressed Air Treatment Accessories.
Quick Links
Our Location
Gem Equipments Private Limited
S.F. No.103, Avinashi Road, Arasur,
Coimbatore - 641 407,
Tamil Nadu , India
All Rights Reserved ©2026 Gem Equipments Private Limited