Specifications

Dryers are sized according to the flow, pressure, temperature and dew point required of the compressed air. If these conditions are changed, the resulting efficiency of the dryer can be drastically affected. The temperature of the compressed air leaving a compressor varies from 82 °C to 177 °C, depending on the type of compressor, it is essential that an After Cooler be installed upstream of most dryers because it will lower the temperature to required level and will remove 50 to 75% of water vapour contained in the air. After coolers are available in either air or water cooled units.

• Option of TEMA C/Std. Engineering Practice design
• Comparitively low Power Consumption
• Less impact of ambient in the outlet temperature
• Vertical and horizontal models available

TECHNICAL SPECIFICATIONS

Air inlet temprature is 150ºC, Air outlet temprature is 40ºC

* Product Design and specifications are subject to change due to constant upgradation.