Specifications

SALIENT FEATURES

» Shell and Copper tube heat exchanger
» Efficient Power saving
» Non-Cyclic system with provision of hot gas bye-pass valve
» HP,LP, WP Overload safety trips
» Range from 2500 CFM to 5000 CFM

The basic principle of operation of the Refrigerated Air dryer is the removal of moisture by cooling air to certain present temperature. There is no process known for producing cold, there is only heat removal. Heat is always attracted by the cold body. This is the basis for the operation of a cooling unit. As long as the temperature of the cold body is lower than the hot source, there will be heat transfer.

The air entering the system enters into the precooler. A precooler is a heat exchanger where the incoming hot air is being cooled by the outgoing cold air so as to reduce the heat load for the evaporator and thereby the refrigeration system. The air from the precooler enter into the evaporator. In evaporator the cooling, heat removal is done by the boiling refrigerant. The air with condensate, enters into moisture separator, where the moisture is removed by the centrifugal action of air. The air free from moisture enters the precooler to cool the incoming air and thereby some heat is added.

The refrigerant circuit consists of a Compressor, a Condensor, a Filter Dryer, an Expansion Valve or a Capillary Tube and an Evaporator.

Technical Specifications:

* Product Design and specifications are subject to change due to constant upgradation.