Welcome to Gem Equipments.

sales@gemindia.com - 9344455927

service@gemindia.com - 9366631697

HEATLESS DESICCANT AIR DRYER

SALIENT FEATURES:

  • Power on light.
  • On - Off switch
  • Tower pressure guages
  • Highly accurate motorized cam timer.
  • Differential pressure guage for filters.*
  • PLC*
  • Cycle failure indication*
  • Sized to save heat of adsorption - minimizes purge air usage.
  • Limited velocities through tower prevent bed fluidization - stops desiccant dusting.
  • Large desiccant bed - ensures sufficient contact time to produce -40° C Dew point(-80°C Dew point with Molecular sieves)
  • Uses bulk desiccant - no special cartridges required.
  • Can be offered for higher pressure and lower dew points also.
Download Brochure
HEATLESS DESICCANT AIR DRYER

Optional

Fill and drain ports:

  • Separate fill and drain ports for ease of desiccant replacement.
  • Heavy duty purge exhaust mufflers for quite operation.
  • Non-lubricated inlet control valves.
  • Purge flow valve for adjusting purge rate.
  • Pressure relief valves on both towers.

Stainless steel support screens and air diffusers:

  • Easy removable for cleaning.
  • Filters out gross contaminants protect valves.
  • Prevents channeling.

Structural Steel Frame with complete floor stand:

  • Easy installation.
  • Dryer is completely assembled, piped and wired before shipping.
  • Optional factory mounting of pre and after filters.
  • Shipped with full charge of desiccant. Choice between alumina or molecular sieve.
  • Only hookup utilities need to operate.
  • Lifting lugs for easy handling.

Filters

Pre Filter:

Every dryer should be equipped with pre-filter to protect the desiccant from free water contamination, dust, scales, etc., from compressed air supply. This assures top efficiency and longer desiccant life.

Zero Oil Filter:

Oil from the compressor's crank case will be passed on to the line with the compressed air. This will severely effect the life of the desiccant. To enhance, oil particles are removed in this filter upto 1 micron rating.

After filter:

This is provided after the dryer to remove the desiccant dust carried over to the equipment.

TECHNICAL SPECIFICATIONS

MODEL Air Flow Electrical Connection Inlet / Outlet Dimensions (mm) Dessicant Weight
SCFM Nm3 / hr V Ph Hz BSP L W H Qty/tower Kg
HLD-030 300 510 230 1 50 2" NB 1400 1000 2400 110 350
HLD-040 400 680 230 1 50 3" NB 1400 1200 2480 140 400
HLD-050 500 850 230 1 50 3" NB 1600 1300 2230 180 500
HLD-060 600 1020 230 1 50 3" NB 1600 1300 2450 215 650
HLD-075 750 1275 230 1 50 4" NB 2000 1300 2200 260 800
HLD-100 1000 1700 230 1 50 4" NB 2000 1300 2500 360 950
HLD-125 1250 2125 230 1 50 6" NB 2000 1300 2750 450 1150
HLD-150 1500 2550 230 1 50 6" NB 2200 1400 2200 520 1400
HLD-200 2000 3400 230 1 50 6" NB 2200 1400 2860 720 1750

OPERATING CONDITIONS

  Min Max
Working pressure 7 bar to 12.5 bar 70 bar
Inlet temperature 45°C 60°C
Atmospheric Dew point -40°C -80°C
Pressure Drop 0.2 bar
Code of Construction IS2825/ ASME Sec VIII Div 1 *
All flanges As per ANSI B 16.5 *
Electric 230 V AC, 50 Hz
* For higher capacity, higher pressure contact factory

* Product Design and specifications are subject to change due to constant upgradation.

NEED HELP?

Live Chat
Agents are offline

send enquiry

captcha